|
|
|
Test Protocols for New Lead Free Alloys Outlined by IPC Solder Products Value Council
|
|
|
|
| 4 June 2010 |
|
|
|
|
The IPC Solder Products Value Council (SPVC) has published a white paper, "Analytical Procedures for Portable Lead Free Alloy Test Data," that provides a set of test protocols for the evaluation of new lead free alloys on the basis of their physical properties. Developed in cooperation with leading original equipment manufacturers (OEMs) and electronics manufacturing services (EMS) companies, IPC said the white paper will help the electronics assembly industry reduce the time and effort required to characterize an alloy and improve its processes without jeopardizing reliability.
The advent of regulations in Asia and Europe restricting the use of certain substances has forced solder material suppliers to provide the electronics industry with solders that are lead free and, at the same time, provide all the needed properties, including reliability and ease of assembly. Since then, solder suppliers have focused their efforts on improving their products and offering an ever-growing choice of alloys. Unfortunately, the lack of physical data available for these new alloys as well as inconsistent test methodology makes it virtually impossible to compare alloy properties and introduces uncertainty as to which to use, according to IPC.
The SPVC white paper prescribes general requirements for determining critical physical and mechanical properties of bulk lead free solder alloys used to make high quality electronic interconnections. The document describes material tests that generate portable data for: (1) direct comparison of different alloys; (2) aiding in alloy acceptability determination for various applications; (3) development of reliability models; and (4) other uses.
For more information on "Analytical Procedures for Portable Lead Free Alloy Test Data" or to download the white paper, visit www.ipc.org/SPVC-LAT1. For more information on the activities of the IPC SPVC, contact Tony Hilvers, IPC Vice President of Industry Programs, at TonyHilvers@ipc.org.
www.ipc.org
|
|
|
|
|
